Sign in to follow this  
jojoharalds

Re: Proj3ct Cut3 Furb [Custom Case /scratchbuild][02.03.2015 Started Painting]

Recommended Posts

Modders Training for Kids (Lesson two :) ) Well everyone,we did some workprogress here today, We thought (let´s work with those things we have at hand) So for todays progress we bring you the EK supremacy "Furb Edition" :) It actually came out quite well (And it was her idea since she did not want it all too pink ) We hope you like it as well,until soon . Thank you for visiting our Buildlog . post-27499-0-46238700-1414614444.jpgpost-27499-0-87931700-1414614445.jpgpost-27499-0-02360300-1414614447.jpgpost-27499-0-98474800-1414614447.jpgpost-27499-0-21891800-1414614449.jpgpost-27499-0-36085500-1414614450.jpgpost-27499-0-60921100-1414614451.jpgpost-27499-0-14542400-1414614453.jpgpost-27499-0-40286700-1414614454.jpgpost-27499-0-47427700-1414614455.jpg

Share this post


Link to post
Share on other sites

Well i finally got the MDF together(Cut and Meassured) There is more where that came:) Never realy worked with MDF but i am very excited to see how it turns out. And since we will paint it all we did not think itnecessary to go with a very classy and expensive wood. Probably start on the creation next week. Thank you for checking out my Buildlog. Keep you posted. post-27499-0-28853600-1414942476.jpgpost-27499-0-51329800-1414942477.jpgpost-27499-0-55935700-1414942478.jpg

Share this post


Link to post
Share on other sites

Well we found some memory for the project, We will be going with 2x 2Gb of Corsair 1333 mhz and 2 x 2Gb 1333 of some sort of Gskill memory that we found laying around, so together we will be going with four sticks(that we mosly do for astethics 4 looks nicer than 2) and since we are nt going to build a high end gaming rig there is really no need for anything more than 8gb of ram. even for games not more than that needed, More updates soon,keep you posted. post-27499-0-64481700-1415039046.jpgpost-27499-0-10499500-1415039048.jpgpost-27499-0-33861000-1415039049.jpg

Share this post


Link to post
Share on other sites

For today we did the EK monarch Furb edition. The Monarch ram modules where Coated very lightly so we don´t loose cooling cababilaty and they where only painted on the outside,so that the thermal pads can transfer heat faster. We hope you like it,we where quite pleased with the outcome. Here are a few Pictures of the process. post-27499-0-03600000-1415130490.jpgpost-27499-0-63011000-1415130506.jpgpost-27499-0-27335700-1415130515.jpgpost-27499-0-68664500-1415130516.jpgpost-27499-0-09530300-1415130518.jpgpost-27499-0-08524900-1415130520.jpgpost-27499-0-41118500-1415130521.jpgpost-27499-0-06041300-1415130531.jpgpost-27499-0-17944400-1415130533.jpgpost-27499-0-35849300-1415130536.jpg

Share this post


Link to post
Share on other sites

Today i went Hunting for an old case,(needed the pci slots and io mount, got one in a local repair shop,so i took it with me home and started drilling the things out that i needed. And also made the cut out in the Motherboard tray (for the 24pin.) Here are a few pics :) post-27499-0-95935300-1415213521.jpgpost-27499-0-56859900-1415213523.jpgpost-27499-0-79714800-1415213526.jpgpost-27499-0-43347800-1415213528.jpgpost-27499-0-91961100-1415213529.jpgpost-27499-0-47172500-1415213531.jpgpost-27499-0-08486900-1415213533.jpgpost-27499-0-37681100-1415213534.jpg

Share this post


Link to post
Share on other sites

Hey everyone, We just recieved the Gpu ,that we was able to get from Mundivalur over @ Icemodz.com (for a very good price) It is a Evga Nvidia Gtx480 with a swifttech waterblock(looking realy nice) it needed some cleaning (but overall looks very nice) the Packaging was very exeptional (for a used product) like alwayes Icemodz does a great job. Here are a few Pictures :) Enjoy,and a nice Weekend to you all :) post-27499-0-76332300-1415395860.jpgpost-27499-0-56297800-1415395863.jpgpost-27499-0-75915800-1415395866.jpgpost-27499-0-50057800-1415395875.jpgpost-27499-0-23731900-1415395878.jpgpost-27499-0-02638400-1415395883.jpgpost-27499-0-43356900-1415395884.jpgpost-27499-0-46989600-1415395886.jpgpost-27499-0-46624200-1415395888.jpgpost-27499-0-00565600-1415395890.jpgpost-27499-0-41072100-1415395944.jpgpost-27499-0-78078300-1415395945.jpgpost-27499-0-96077200-1415395946.jpgpost-27499-0-46571600-1415395951.jpgpost-27499-0-80198900-1415395957.jpg

Share this post


Link to post
Share on other sites

hey everyone, started on the fan Cutouts today for the 360mm rad placement, ran in some trouble(almost fried my Drill,) But i got a nice gift from my fiancee ,she and my daughter went to the store and braought me a little gift. :) And some lupricant(No not like that ) for helping with the Cutting . Here a little Pic of what i had before and what i am rolling with now in the mod tool box :) so much better, post-27499-0-96400500-1415461100.jpg

Share this post


Link to post
Share on other sites

Hey everyone,and a HAPPY NEW YEAR. no i have not given up on the project for those of you wondering,but since i have a real daytime job i was quite busy over the hollyday season. But we are back with the Project.and eager to get some new ideas into the build and play around with some different stuff and materials. Well Today we just test fitted some fans to see where it goes from here,how to fit the powersupply and soforth. trying to put the cabinet togetheher this week so we can go from there . we quickly realised that the screw jut had to go ,so we start to drill holes just so the head of the screws falls into the wood and doesn´t stand out. also might have a surprise next week so stay tuned for that. Thank you all for showing this build you´re interest. post-27499-0-50627100-1420743541.jpgpost-27499-0-29197500-1420743542.jpgpost-27499-0-93143400-1420743542.jpgpost-27499-0-44055000-1420743543.jpg

Share this post


Link to post
Share on other sites

Hey everyone, i have been waiting for quite some time now for some items to get here.(haven´t arrived yet due some problems) hopefully this will happen soon so i can use those items to meassure everything as i go on with the build. But i put all i have for now together and try to work from there. here a little pic on whats going on. not much but hopefully will get some work done this weekend. post-27499-0-24477800-1422035779.jpg

Share this post


Link to post
Share on other sites

hey everyone. did the cutout on the bottom for the Powercable to enter and exit (just how you want to look at it) and started on a little logo (cover for cables and such.) Ingridients: 1x Clear acrylic sheet 30x10 cm 1x painters tape (tesa) 1x Blue and Pink Spraycan (2 cans in total) and a wire (no not to kill anyone) tools: scalpel :) this is how it came out. [Notice] This is only a Testsample will be redone with better materials and mor exact [/Notice] Hope you like it. post-27499-0-62799000-1422103468.jpgpost-27499-0-19845600-1422103333.jpgpost-27499-0-36936400-1422103334.jpgpost-27499-0-30782600-1422103335.jpgpost-27499-0-52112400-1422103336.jpg

Share this post


Link to post
Share on other sites

Well got some acrylic today,will do some work with that,here are a few pics to show ,what i was thinking of. Also had a package one the way today,(But f******* Customs didn´t let it through)hopefully it will work out next week. also placed an order for some watercooling stuff :) I wish all of you a nice weekend,and stay tuned for more updates. post-27499-0-63840000-1422653278.jpgpost-27499-0-81599900-1422653276.jpgpost-27499-0-52244700-1422653275.jpgpost-27499-0-91377900-1422653274.jpgpost-27499-0-20492900-1422653274.jpgpost-27499-0-10673400-1422653273.jpgpost-27499-0-31070400-1422653272.jpgpost-27499-0-39653100-1422653271.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this