Hello, I am looking to start my first custom build and would like to make sure what I've chosen for hardware is compatible. I would also like any suggestions on hardware changes that might give me more bang for my buck. I am an architecture student going into graduate school and I'm looking to build a 3d workstation for a budget of $2000. I need to run programs such as Adobe Suite, Autodesk Softwares, Rhino 3d, Grasshopper, etc. I have researched and put together the following build based on suggestion and information on cpcr. CPU: Intel Core i7-4770K Haswell 3.5GHz LGA 1150 84W Desktop Processor Intel HD Graphics BX80646I74770K Motherboard: ASUS MAXIMUS VI GENE LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard Memory: CORSAIR Vengeance Pro 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMY16GX3M2A1600C9R Red) Graphics Card: NVIDIA® Quadro® K2000 VCQK2000-PB 2GB GDDR5 PCI Express 2.0 x16 Workstation Video Card Boot Drive: SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD) Hard Drive: Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive Optical Drive: ASUS Black 18X DVD-ROM 48X CD-ROM SATA DVD-ROM Drive Model DVD-E818AAT (DVD-E818AAT/BLK/B/GE) - OEM PSU: Antec EarthWatts Platinum Series EA-650 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS PLATINUM Certified Active PFC Power Supply - Intel Haswell Fully Compatible Case: COOLER MASTER N600 V2 (NSE-600-KWN1) Black ABS / Mesh ATX Mid Tower Computer Case CPU Cooler: Intel BXTS13X Water/Liquid Cooling Thermal Solution for Socket LGA1150/ LGA2011 / LGA1366 / LGA1156 / LGA1155 OS: Microsoft Windows 8.1 Pro - 64-bit - OEM Once again, I'm open to any changes or suggestions. I've found lots of great information cpcr and would greatly appreciate any and all feedback. Thanks in advance.